OAT Sensor Type

flycozy

New Member
Joined
Dec 9, 2005
Messages
14
I just received my new OAT sensor. Its PN 100433-000. The manual says the type 2 PN is 100433-001. So close! But the manual also says there is a black band on a type 2. Mine has no black band. So do I have a type 1?
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
The 100433-000 is the OAT for an EMS. It only has two wires and no black band. The 100433-001 is the type 2 OAT for an EFIS. It has three wires and a black band.

The type 1 OAT for an EFIS was a totally different part number. It sounds like you got an EMS OAT.
 

flycozy

New Member
Joined
Dec 9, 2005
Messages
14
You're right, I must have ordered the wrong one. Thanks for the quick reply. I love the EFIS by the way, it makes a huge difference in my panel! Keep up the good work!
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
If you give us a call at 425-402-0433 we can help you get the right one.
 
Top