Help me out here, what does EGT#5 have wrong with it? Vern
vlittle Active Member Joined May 7, 2006 Messages 540 Jul 4, 2014 #1 Help me out here, what does EGT#5 have wrong with it? Vern Attachments screenshot-20140704-232709-160.bmp 1.8 MB · Views: 174
mmarien Murray M. Joined Dec 26, 2009 Messages 1,206 Location Saskatoon SK CAN Jul 4, 2014 #2 It could be a loose connection. But as I slowly burnt my EGT probes up they displayed that symptom. One and two are fried on the display below:
It could be a loose connection. But as I slowly burnt my EGT probes up they displayed that symptom. One and two are fried on the display below:
D dynonsupport Dynon Technical Support Staff member Joined Mar 23, 2005 Messages 13,226 Jul 5, 2014 #3 Vern, We'll show that if the probe is railed out high or low. Most likely a broken connection. Look in your EMS DEBUG DATA and you can see what that input is doing.
Vern, We'll show that if the probe is railed out high or low. Most likely a broken connection. Look in your EMS DEBUG DATA and you can see what that input is doing.
vlittle Active Member Joined May 7, 2006 Messages 540 Jul 5, 2014 #4 I went flying today and the fault still displayed at power-up. Cleared itself right away after engine start, consistent with a loose connection somewhere. Thanks, Vern
I went flying today and the fault still displayed at power-up. Cleared itself right away after engine start, consistent with a loose connection somewhere. Thanks, Vern