% of HP X'ed out

[dabear]

The Percent of HP widget is X'd out now that I've added it to the EMS screen. Since I have the M14P, I chose other in the setup screen for engine type. But it is set for 360hp.

Is there any specific settings I need to address to get it to work or will it only work with a "standard" lyc or contenental engine?

Bear

 

[dynonsupport]

It will only work with a lyc/con engine. It's based on tables published by the manufacturer, and an M14P is going to be totally different.

 

[dabear]

from the M14P Maintenance Manual...

RPM %Power MAP (mm Hg)
2900 99% 125 (Surplus)
2400 82% 99 (Surplus)
2050 70% 75% (Surplus)
1860 64% 735 +/- 15 (Absolute)
1730 59% 670 +/- 15 (Absolute)
760 26% --------------------- Idle

BTW, those are the power settings for the M14P (360HP version)

let me know if this helps to set up the %hp or if you need more information.

 

[dynonsupport]

Actually, the entire chart, with MAP/RPM/altitude,OAT, and and altitude is needed, as you'd see in a Lycoming manual. For instance, altitude is about a 30% effect and OAT is about a 10% effect. If you can provide it, and it has everything need, know that we can't provide an implementation timeframe.