We have a Skyview system with the SV-EMS-220 with a 100411-002 oil pressure sensor. The sensor looks like it has failed and is reading 10.5 ohms at 0 PSI and 11.7 ohms at about 80 PSI.
What ohms should it read in its 0-150 PSI range?
Also we had the the Fuel Pressure sensor fail on this setup a few weeks before and question if there might be something we are doing wrong or if we just have had bad luck with the sensors?
Thanks
Rick
What ohms should it read in its 0-150 PSI range?
Also we had the the Fuel Pressure sensor fail on this setup a few weeks before and question if there might be something we are doing wrong or if we just have had bad luck with the sensors?
Thanks
Rick