Panel fitt D100/120

Letpmar

New Member
Joined
Jun 27, 2007
Messages
56
Hi
I have ordered a Sportcruiser and intend to have A D100 and D120 with a Garmin 296/496 and Garmin SL30. The Factory will build the panel for me can you tell me what connections I need to make sure are fitted to ensure the two units can talk to each other and I can get the maximum information from the GPS and the SL30. Also what is the simplest set up to allow me to plug a laptop into the Dynon units for upgrades.
Thanks in advance

Pete
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Pete, all of this information is covered in our install manuals, which you can find on our main web page. Basically, you need to hook two wires up between the D100 and D120 and hook the SL-30 into the D100 and the GPS into the D120.

Our wiring harnesses come with connectors on them to hook to a PC for updates.
 

Letpmar

New Member
Joined
Jun 27, 2007
Messages
56
Thanks for that I have read the instalation guide am I right in saying the full DSAB connectivity is still
not released

Pete
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Full DSAB is not out yet, so you need to do the null modem as well for now. You don't hard wire that in and it's using the PC connections that are already on our harness. This null modem connection is also covered in the install guide.
 
Top