Pitch and roll inverted

[Pegaz]

Excuse me for my English.
Here, the AP servos were improperly assembled, skyview acknowledges the roll and pitch. But the AP were inverted mounting. How can we change the setup and the pictch instead of the roll and the roll instead of the pitch. I would not remove the autopilot.
Thanks for your help.

 

[Dynon]

The servos learn the direction of travel when you calibrate them, actually. So this means that during calibration, the instructions on the screen for moving the stick weren't precisely followed. What you want to do is to go back to SETUP > HARDWARE CALIBRATION > SERVO CALIBRATION > CALIBRATE to re-teach it the correct movements for each axis.

 

[Pegaz]

Indeed, they have been calibrated in the workshop and mounted reverse. I'll try tomorrow.
Thanks