Hello,
I have a CTSW with an D700 and 2 servos SV32. Yesterday I made the Servo Calibration Procedure with success.
During the Servo Test Procedure I found out that the Stick moves only a little bit to the left and down and/or a little bit to the right and up. Is this normal? I expected full left and full down and/or full right and full up.
After that I made a little test flight and found out that the servos in principles are working. There is only a little bit fine tuning necessary.
Regards,
Taigajoe
I have a CTSW with an D700 and 2 servos SV32. Yesterday I made the Servo Calibration Procedure with success.
During the Servo Test Procedure I found out that the Stick moves only a little bit to the left and down and/or a little bit to the right and up. Is this normal? I expected full left and full down and/or full right and full up.
After that I made a little test flight and found out that the servos in principles are working. There is only a little bit fine tuning necessary.
Regards,
Taigajoe