PS PAR100EX

[rwtownson]

I am trying to wire the Skyview audio outputs to my PS PAR100EX audio panel/com.  The Skyview outputs Audio Left, Right and Ground.  The PAR100 accepts several "Unswitched Audio" inputs as Audio High or Audio Low, or it will accept an "Entertainment Input" as Audio Left, Right and Low.  The "Entertainment Inputs" are muted during radio communication. 

My options seem to be:
- to combine the Skyview "left and right" and wire to one of PAR100's "unswitched audio" ports
- to combine the Skyview grounds and wire "Left" to one PAR100 "unswitched audio" ports and "Right" to another
- to wire the Skyview "left right and ground" to an entertainment input on the PAR100, but then a warning from the Skyview would mute if the Com was active...

I'm a rookie at this radio stuff!!!

Any advice you can give would be appreciated

Regards

Ron

 

[dynonsupport]

Low is just another way of saying "ground", first of all. We'd recommend the first option. You want the audio unswitched so that you can hear alerts even if you're also listening to ATC.