Re-screen display

[Rob]

Hi, Have installed EFIS-D100 and EMS-D120 coupled with a Garmin 196 GPS and it is all working great ,Have version 4.2 installed and use the EFIS as DSAB master(I think) and can get the engine info across on to the EFIS .Can you move the EFIS info over to the EMS screen with this setup .
Regards Rob Bellert

 

[dynonsupport]

Rob,
If you are running 4.2 software on both units, and you can see the EMS on the EFIS, then the EFIS on the EMS should be easy. All you need to do is hold down the right button on the EMS for two seconds and it will bring up the screen configuration menu. Just choose a screen in that list that has an EFIS defined.