Rotax 912iS Can Bus Connection

[rlnorris52]

I have installed a Rotax 912iS and I am connecting it to my Skyview using the EMS-221.  In the installation manual it shows a sketch of the Lane A and Lane B tied together at pin 36 and 37. Does anyone have experience with this and knows if this is correct.

Thanks
Ranman

 

[dynonsupport]

Ranman,
It is correct to hook the Lane A and Lane B outputs together and then into the EMS-221 as documented. This is the way we have done it over hundreds of 912iS installs.