Showing a target descent rate as a number or a bug

[bdflyer]

Do you know if its possible to set up a custom indication on the PFD?

Here is what I’m looking for:

1. Show a target descent rate (“gpdr”)
2. GPDR (Glide Path Descent Rate) is a dynamic, calculated target descent rate (can be a bug)
3. PFD calculates the GPDR using this formula: (gps_ground_speed * 5) = GPDR
4. GPDR represents the target descent rate to maintain a standard three degree glide path

 

[skysailor]

Take a look at the VNAV setup in the PFD section. The manual describes both the setup and use.