Skyveiw interference of XCOM

[Graeme_Donald]

My radio (xcom) is being interfered by the Skyveiw. I t pulls it down and creates static. Audio input is not the problem as disconnecting it makes no difference. Gets worse as Dynon warms up.
Any suggestions would be appreciated.
Graeme :'( :

 

[trevpond]

Hi Graeme

You need the filter kit from Dynon. They fit on the ends of the network cables on the back of the Skyview.

regards



Trev ;D ;D

 

[Graeme_Donald]

Thanks!!
Will get on to it.
Bloody RF !!!

 

[jakej]

not so fast ;D... it will depend on the s/n of the unit as Dynon have made changes to them

My first port of call would be to contact support with the s/n

Jake J

 

[Bardample]

I have an Icom A210. When I use PTT all Skyview EGTs & CHTs jump to very high values (500s CHT) while PTT engaged.Stops if I turn off radio. I have only just installed these probes and start around ambient temp in hangar.No engine starts yet JeffKR :-?

 

[dynonsupport]

We have a way to change the EMS-220 to solve the thermocouple rise with PTT pressed. Contact our support staff on email or phone and they can get you set up with a fix for your EMS module.