SkyView Classic Screen Failure

GalinHdz

Active Member
Joined
Mar 3, 2008
Messages
716
Location
KSGJ/TJBQ
Today while flying my pilot side screen failed. I did a hard re-boot and it came back up. About 5minutes later it failed again. Another re-boot brought it back and about 5 min later it failed again. I took a photo of the failure to see if anyone can tell me what could be the problem. The co-pilot display worked perfectly the entire time. I fear I may have to send it to DYNON for repair.


N819PR Screen Failure 1.jpg
 

RV8JD

Active Member
Joined
Dec 17, 2017
Messages
340
Unfortunately, that looks like the "Rainbow Screen of Death". It can be fixed, but has to be sent back to Dynon for repair (And hope they have the needed parts!). See these threads:




Contact Support for an RMA. Probably will be charged the flat rate repair cost of $450. Hopefully they have repair parts available (supply chain issues).

 
Last edited:

GalinHdz

Active Member
Joined
Mar 3, 2008
Messages
716
Location
KSGJ/TJBQ
Talked to DYNON support and the unit has to go back for repair. After all it's been 10yrs and 812hrs of it working perfect so I really can't complain. ;)
 
Top