skyview D700 fails to boot

N125YX

New Member
Joined
Apr 2, 2011
Messages
26
Location
ft payne AL
D700 was freezing after about 1 to 2 min following bootup (this is all on the ground, have not had engine start yet). Updated the firmware to the latest file from the website. Finally got it updated (it first froze during update and had to be shut down). Following update it initially behaved normally, then exhibited erratic symptoms freezing on the splash screen sometimes, then booting, then screen flashes with vertical lines. Now it will not boot even to the splash screen. I removed the backup battery from the system, but no change.
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
D700 was freezing after about 1 to 2 min following bootup (this is all on the ground, have not had engine start yet).  Updated the firmware to the latest file from the website.  Finally got it updated (it first froze during update and had to be shut down).  Following update it initially behaved normally, then exhibited erratic symptoms freezing on the splash screen sometimes, then booting, then screen flashes with vertical lines.  Now it will not boot even to the splash screen.  I removed the backup battery from the system, but no change.

Contact Dynon Tech Support - 425-402-0433 or support@dynonavionics.com to arrange for repair for the SV-D700.
 
Top