You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
SkyView Installation Manuals
- Thread starter dbyrnes
- Start date
- Joined
- Mar 23, 2005
- Messages
- 13,226
We don't expect to have those manuals ready until the product is shipping, even in a basic form. We can share just about any data we have if you have a specific question though.
Thanks. Need to know if my 3" GPS and VOR displays need to be retained or if the SkyView will accept input for GPS and VOR from Garmin 430, and VOR from King KS-125, display appropriately and selectively on the HSI and selectively output to autopilot (assuming Arinc 429 output to A/P).
David
David
- Joined
- Mar 23, 2005
- Messages
- 13,226
David,
It will be a while before we can do any of that. We won't have ARINC-429 at launch, which is what you need to interface with the 430. We will be working on it very soon however.
I doubt we will ever talk to the KX-125. We've had very bad luck interfacing with the King radios in our current products.
Also not sure that we will output data over ARINC to an autopilot. Are you talking about GPS steering or something else?
It will be a while before we can do any of that. We won't have ARINC-429 at launch, which is what you need to interface with the 430. We will be working on it very soon however.
I doubt we will ever talk to the KX-125. We've had very bad luck interfacing with the King radios in our current products.
Also not sure that we will output data over ARINC to an autopilot. Are you talking about GPS steering or something else?