Skyview network alarm

[nleonard]

I have a Skyview installed in an RV-12 and have an constant alarm display (Caution). It indicates a second network error and the network test indicates an issue with (wires) 4/8.  I have checked the wire continuity from the screen to the wiring hub.  All nine wires are straight through.

I have the current software but it was a problem with earlier versions as well.

Where do I go from here?

Thanks,

Nick
(916-425-1064)
nick@nleonard.com

 

[Bill_H]

This is a known issue with the RV12 wiring harness and the autopilot servo wiring. There are 2 pins you have to swap. Call or email Vans support and they will send you an email with the details. (on a trip, don't have it handy.) Easy fix, I had the same thing.

 

[paul330]

I had the same warning on my RV10 and tracked it down to a splitter cable from Dynon that had wires 4/8 cross wired.