SkyView screens

[glenn654]

Though shown with two screens on the products page, I assume that the flight instruments section can be shown with a moving map and engine monitor on the same screen, No?

Glenn Wilkinson

P.S. I also assume that ground obstructions will be shown on either of the moving map or the EFIS page.

 

[dynonsupport]

You can show all three on a screen at once. Of course, the screen does get a bit compressed. The PFD and MAP will be 40% and the EMS will be 20%.

We will not have obstacle displays when the product first ships, but we will shortly after that and they will show up on the map as well as the synthetic vision.

 

[ManfredPorsche]

Excuse for my defective English. But: Is it to be exchanged possibly the display images (PFD / MFD)? By the installation of the second device it is not sensible if on both screens the PDF and the MDF in the same position are.

Kind regards

Manfred

 

[dynonsupport]

Hi Manfred,

Yes, the layout or position of the PFD and Map parts of the screen can be exchanged. You can display the PFD on any screen, and in any position relative to the other things that may also be on the screen such, such as the EMS and MAP.