Skyview with Skysports capacitance probe

rockyjs

Member
Joined
Jan 28, 2007
Messages
40
Location
Navarre, FL (AL55)
Is anybody operating the Skyview with Skysports Capacitance probes?  I callibrated the Skysports probe and then calibrated the senders on the SV.  They calibrated fine, and the fuel quantity indicates correctly at 12 volts.  When I take off they read erratic and often read 0.  I'm assuming that they are producing more than 5 volts when the system voltage is at 13.8.   I read that someone set the full calibration on the probe itself to output 5.0 volts.  Both fuel tanks are 46 gallons so sender calibration is a lengthy process.   Any help??
Thanks
Rocky
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
One thing you can do to help yourself troubleshoot is to is view the actual voltage coming off the sensor as read by the SV-EMS-220. It's under EMS SETUP > SENSOR DEBUG DATA.
 
Top