SV Power inputs-- Isolated?

[vlittle]

The dual SV power inputs, are they diode isolated? I'd like to wire redundant power connections from separate circuit breakers, but this only works if the SV power inputs are diode isolated (i.e. a fault on one bus does not propagate to the other bus).

Thanks,
Vern

 

[dynonsupport]

SkyView does not have dual power inputs. If you wish to do this, you'll need diodes outside.

Note that SkyView will not charge the backup battery unless the voltage is above 12.25V (in order to only charge when you alternator is online), so you can't have too many diodes, but one is fine.