SV-XPNDR-262 fail

[Luiz_Carlos]

Hi Dynon

My skyview system was installed on a zenith for me. Everything worked except the transponder.

I've only had the device with the dealer's gulf coast in Brazil and the problem persists.

You see a red x on the screen grid and the message transponder failed.

Energy 12v is coming and checked ground wire. What might be happening? The Skyview does not recognize the transponder. I have already entered the hex code. Appears at serial port # 1.

Thanks

Luiz Carlos
Rio de Janeiro
Brazil

 

[dynonsupport]

Please contact Dynon Avionics Technical Support directly for assistance with your specific problem. They can work with you via email - support@dynonavionics.com. When you send the email, mention that you first reported this issue on the Forum.

Hi Dynon

My skyview system was installed on a zenith for me. Everything worked except the transponder.

I've only had the device with the dealer's gulf coast in Brazil and the problem persists.

You see a red x on the screen grid and the message transponder failed.

Energy 12v is coming and checked ground wire. What might be happening? The Skyview does not recognize the transponder. I have already entered the hex code. Appears at serial port # 1.

Thanks

Luiz Carlos
Rio de Janeiro
Brazil