I have a panel, with this equipment, between others, in a RV-7 that I'm finishing: D-100, D-120, HS-34, AP-74, ail and elev servos, SL-30 and 495 GPS. The point is that among the SL-30 and the 495, could be connected both of them, so the 495 gives the frequency of comm and nav to SL-30 ( using NMEA out with VHF), across the serial port of both equipments. My case, both of them are connected to the HS-34, to use the HSI of the D-100 and so the autopilot.-
Being that the SL-30 and the 495 only have one serial port (the 296 had two) that are being using by dynon, the way to resolve this, could be that dynon recive the frequency and transmit to the SL-30, is that possible?
My regards
Roberto from Argentina
Being that the SL-30 and the 495 only have one serial port (the 296 had two) that are being using by dynon, the way to resolve this, could be that dynon recive the frequency and transmit to the SL-30, is that possible?
My regards
Roberto from Argentina
