Latest activity

When i engage autopilot after a while i get network system error. Everything works fine. Changed ethernet cable between units no help

It was a busy day at the Six Pack Aero hangar. The basic elements of the Six Pack Aero's Legacy XL sheet metal structure was prepped...

I appreciate your help Swatson99 and feel that I have been responding appropriately to your questions as I understand them; "On the...

Hello .any one please help me I have six cylinder piston engine .from last three flight only No 4 cylinder showing -12 GPH When we...

Fair enough. Yes, the autopilot controller has the Level button but I just didn't see one on your panel design. I just assumed you were...

For all: jsgro and bonesurf20@gmail.com are both scammers. They don’t accept assured money transfer (PayPal, EBay) and when I asked them...

Fair enough. Yes, the autopilot controller has the Level button but I just didn't see one on your panel design. I just assumed you were...

HiSwatson99, The fail, in both the original & new replacement is, a red cross with the words ADAHRS Internal Fail. As far as I am...

The autopilot system will have a Level button mounted in an appropriate location on the new panel. Here's the link for that specific...

I would be tempted to put a Level button above the Disconnect. Since you'll be operating the autopilot through the HDX this is a good...

Hard to see how the pitot/static setup would cause two ADAHRS boxes to fail. And given that it's two ADAHRS units that failed, my money...

The original (first ) module worked faultlessly for about 130 hrs. Second, was the loan module - for about 5 hrs or so (would have to to...

Yes. As stated single, home made/designed, mast for all three functions 😈

Thank you Bob, that was the ticket. Battery wires into HDX same as past versions. Also if you order them don't forget the special...

I’m not sure what’s available on the Skyview side, but the G5 Installation Manual I have says RS-232 inputs on the G5 should be set to...