Latest activity

Been using my HDX with EMS for a while. The bus voltage now suddenly shows Zero. Everything else is normal. Battery is fully charged...

Need more specifics. I would start by downloading the EMS data log. You can then review the Excel file for correlations and anomalies...

Could be a bad probe, a bad connection or a problem in the EMS. Check the spade connection crimps. If still reading incorrectly, swap...

Someone with two legacy D1000 screens asked my advice. The Jeppesen Aviation and Obstacle data base shows installed but there is...

During a test flight yday my No 3 EGT temp went off the scale (1111 deg C) & stayed there even when the engine cooled down after...

How much to send to Canada Garson Manitoba R0E 0R0

Yes, who knows, but it’s been perfect since I added the second feeder. Flew 45 minutes out and again back, it is working perfect.

I reinstalled the nav data base and all is good. Thanks for the help.

I reinstalled the nav data base and all is good. Thanks for the help.

I reinstalled the nav data base and all is good. Thanks for the help.

Is this unit FAA PMA approved?

I see the same thing in my Glasair. I also performed the in-flight compass calibration with >108 numbers on both ADHARS. I was...

There's a chance that settings aren't syncing between displays, and behind the scenes one is the leader/master, but you don't know (or...

Thanks Ken

Take a look at the top line on the 550 screen where both the active mode is annunciated in green and the armed mode, if any, is...