Latest activity

Have you reviewed this? https://forum.flydynon.com/threads/ground-loops-and-noise-in-aircraft-systems.14716/

The weird part about that is, the panel was bare aluminum before, and it was working perfectly for almost 2 years. Add some insulating...

I’m no expert but I would certainly try isolating your equipment from the panel, as it sounds like you’re getting a ground loop by...

I had the whole instrument panel pretty much done, everything worked. Then I wrapped it. I pulled everything out of the front that...

FWIW I’d do is try your a/p panel in another plane - NOT a ‘loaner’ in your 8. If there is a problem in your 8 other than the a/p panel...

There's a reason they make covers for pitot tubes...

Thank you for the heads-up about this issue. I'll keep the panel area free of any stainless steel coffee mugs!

Caution with the copper bus bars, make sure they are covered with something during install, or inaccessible from your seat. I ruined a...

System Event 3 tells you nothing more than that there was an error that caused the system to reboot. See post #2.

I got the system event 3 on shutdown today. Anybody know what it means? downloaded the diagnostic log and user logs. Kurt

My AOA was acting very erratic (not beeping when doing stalls, but beeping during climb out) Took the pitot probe off and found the AOA...

I got the system event 3 on shutdown today. Anybody know what it means? downloaded the diagnostic log and user logs. Kurt

Searched the forum but didn't find much help. Link me if something is relevant. Probing the collective minds here for suggestions...

Caution with the copper bus bars, make sure they are covered with something during install, or inaccessible from your seat. I ruined a...