Latest activity

Thanks WenEng! I can see that having one "old" data base resident each time might be advantageous but not half a dozen. Also I would...

True, the obstacle and aviation are never erased by the Dynon system, if you want to remove the old databases then you would have to...

Yep, I think you have found your problem...

Becker AR6201-(022) Construit en janvier 2018. Très bon état général et en parfait état de fonctionnement. Câbles inclus. Formulaire 1...

Think I have found the problem some moisture into ems220 Eng sensor plug green death hopefully some contact cleaner will fix it til I...

I carnt attach video but it goes fro 0-10 v up and down when I start engine it says 2 v but starts fine and hi have and old fashion...

Dynon servo kit does not have shielded cables.

Vans specifically refers to Dynon servos in several instruction manuals i.e. OP 58-14

I tend to agree. But in places like the wing, where you can't easily open it up to fix problems, I prefer to err on the side of caution...

Look at the link I posted. You should have a common ground point somewhere. You may have separate common ground points for your power...

Insert the USB back into your computer. Click on that USB on your screen and open it. Then click on the first file that is old and then...

Whenever I download a new chart update cycle it loads in line with the last few chart updates When I go to upload them into the Dynon...

Vans may specify shielded for the autopilot servos, but I think thats just a generic "catch-all" for good clean signals to the device...

Thx a lot! If I would choose the shielded wires for the servos, where should I ground the shield? At the servo, at the front grounding...

Hi everyone. Well I got to the hangar today and to my consternation found the aircraft close to electrically dead, despite being left...