Latest activity
-
MOn the Dynon HDX can the "PIREPS" symbology be turned off? I find that it clutters the screen.
-
DHello everyone, I have installed a traffic detector called Superneurone in my aircraft. In order to receive audio warnings, I need to...
-
MMark_Dickens replied to the thread VPX Offline.Without making a single change to Skyview, it came back online again yesterday, and yes the serial port communication was normal. The...
-
GGKC Aviation reacted to jakej's post in the thread Low voltage hdx indicator any advice please random goes low but system is charging fine ok with
Like.
I’ve seen the exactly the same issue years ago,cleaned the pin contacts with a soft wire brush then flushed the gunk out with contact... -
YYleg reacted to airguy's post in the thread Low voltage hdx indicator any advice please random goes low but system is charging fine ok with Like.
Yep, I think you have found your problem...
-
YYleg reacted to airguy's post in the thread Low voltage hdx indicator any advice please random goes low but system is charging fine ok with Like.
Are you certain your actual battery voltage is not going down? If the alternator is not charging (which is indicated by the -3 amps...
-
YYleg reacted to GKC Aviation's post in the thread Low voltage hdx indicator any advice please random goes low but system is charging fine ok with Like.
Your voltage sense and your amps are two different sources giving you the same information. It really looks like your charging system is...
-
YYleg reacted to jakej's post in the thread Low voltage hdx indicator any advice please random goes low but system is charging fine ok with Like.
I’ve seen the exactly the same issue years ago,cleaned the pin contacts with a soft wire brush then flushed the gunk out with contact...
-
Rhino replied to the thread Shielded or twisted wire for yaw and pitch servos and where to ground the servos.I'm not either. That was just a joke. -
Jjakej replied to the thread Low voltage hdx indicator any advice please random goes low but system is charging fine ok.I’ve seen the exactly the same issue years ago,cleaned the pin contacts with a soft wire brush then flushed the gunk out with contact...
-
Jjakej replied to the thread VPX Offline.Understand it’s real hard sometimes troubleshooting online considering “We” are unable to see/know how your plane is wired. If I was a...
-
JIntermittent electrical issues will give you gray hair and cirrhosis of the liver.
-
Jjakej reacted to Rhino's post in the thread Shielded or twisted wire for yaw and pitch servos and where to ground the servos with Like.
That's what airguy was pointing out.
-
Jjakej reacted to airguy's post in the thread Shielded or twisted wire for yaw and pitch servos and where to ground the servos with Like.
I built all my own cables as well, using twisted pair instead of shielded for the network connections, no issues in just over 3000 hours...
-
Jjakej reacted to Carl_Froehlich's post in the thread Shielded or twisted wire for yaw and pitch servos and where to ground the servos with Like.
What I did on all four builds: - Four #22 conductor shielded wire for the four network connections. - One single strand #20 wire for...