Latest activity

No success with my newish HDX. I waited 10 mis after it hung up at 99% complete. Pressed buttons 1,2 and 5 all together , rebooted and...

Great. Glad you got it worked out.

Not that hard, actually. Go into Setup menu, EMS Setup, Sensor input mapping, select Fuel Level, and pick or write your own. Easy peasy...

Not that hard, actually. Go into Setup menu, EMS Setup, Sensor input mapping, select Fuel Level, and pick or write your own. Easy peasy...

The GPS-175 obviously has to use the ARINC-429 to connect to the HDX, and the GNC-215 does conform to the SL-30 protocol, so it likely...

these are the steps aI've done andthe result: Steps performed: Updated both HDX displays to SkyView v17.3 (both powered on, aircraft...

I also have two screens but learnt a while back that it’s better to only have one powered on during software updates. After I had sorted...

I have two screens

I have the same problem. But now Second screen powers of during startup and the mainscreen, after startup wants de shut down. I have to...

Same here- stuck at 99%. Had to cycle power to Xpdr to correct. 1,2&5 reboot of display did not correct. I have a single display. Kurt

so far 3 for 3 of hanging up here.

All, We are aware of some reports of the most recent transponder update seeming to stall at 99%. If you experience this, let the...

All, We are aware of some reports of the most recent transponder update seeming to stall at 99%. If you experience this, let the...

Look at the bright side. We're all getting very consistent results from our Dynon systems.

I had the same thing happen to me today. Single screen. Got to 99% and stopped. Called Dynon support and left a message. They called me...