Latest activity

I have a different ammeter shunt than the one supplied by Dynon, so I need to edit my Sensor Config File to change the c_X1 constant. I...

On the last few flights my attitude indicator goes up to very high angle of attack (up to 45 deg), the skid ball goes from left to right...

Hi Vlittle, thanks for replying, AP only turns off when Camera is displayed. No Harware issue! Mike

Thanks for the response. I was flying with version 17.1.0 at the time. I will upgrade to 17.3.0 the next time I am at the airport. I...

Mike, you should check your datalogs. The AP dropping off line can be caused by more than one problem, such as loss of gps signal, an...

Please, Dynon team, fix this immediately. This error is a good reason for customers to choose an alternative product. It took me a long...

I know you said you’ve checked your registration but have you also checked your HEX code is the same in your ADSB as your transponder?

Here's my panel with the AP installed. Follow the instructions and all went as advertised. Do not install a switch to turn off the yaw...

Thanks for the info. I have noticed it doing this even in straight and level flight for no apparent reason. I'll see about getting an...

No difference with the Classic. Using rheostats was discussed in that thread I linked. They'll probably work, but the results may not be...

It's not a fault of your aircraft - it's the ground system not keeping track of your aircraft during maneuvering. When that happens the...

Occasionally I'll pick up my own ADSB while maneuvering tight turns or aerobatics. I've seen double and triple ADSB returns on other...

Note that the Skyview really doesn't need a rheostat, just a variable resistance resulting in a variable voltage control towards the...

In looking through the diagnostic data a bit this morning, I see that the files show you're running 17.1.0. Have you updated to the...

Thanks for the comments and info - very helpful. I have the original classic sky view - so any thoughts on to why a rheostat may not...