Latest activity

The Archer antenna is tuned for VOR/ Loc. it so happens that glideslope is a multiple of the LOC and the antenna receives it fine...

If you have power and ground to the units (both the remote transceiver and the control head, then you will get something on the radio...

I installed all three of these components, intercom, radio panel and transceiver, and attached to the skyview network using the SV...

We have been working with AJ (for over a year now!) The instructions could be a bit clearer, to say the least, but I think we are...

I feel your pain, Jeff from Trio spent time with us in our PA28-181 and verified good rigging. Reluctant to make any predictions, but...

So, we're having the same issues with our PA28R, both horizontal AND vertical. It is really close, and then just wanders off for a...

I believe whatever one comes up first.

It may also be that there is a problem with my device.

Hi Chris Thank you for the explanation. If I understand correctly, I can define the master by the power-up sequence of the HDX devices...

You need one for each display as any display can be elected the master and that is where the WiFi then gets used from. You can not...

Doesn’t happen on mine.

I'll preface by saying I haven't had anything to do with the Bob Archer antennas. The paperwork says they are a VOR antenna...

Just shot my first ILS approach in my newly finished RV7. Or i tried…. And yes I checked notams and nothing was stated about vertical...

I've had this happen many times. It show garbage winds and direction usually upwards of 90 knots. So far I haven't be able to determine...

Graham Element 14 is a good source for these sort of connectors from NZ.