Latest activity

I was only on the battery power.

The problem ended up being the mic and phone jacks and not enough shrink wrap near the base and there was contact, in the end a self...

Yep, diplexer - there is a difference.

Diplexer, NOT a simple splitter.

Were you on ground power during the calibration or battery power alone? Ground power, like a battery charger, will pulse voltage on/off...

I'd like to see the pics.

The problem ended up being the mic and phone jacks and not enough shrink wrap near the base and there was contact, in the end a self...

For EMS sensors it’s always better to use a ground from the Dynon EMS unit, you can pair them up if you don’t have any spare ones.😉 ps...

Diplexer, NOT a simple splitter.

I have to correct my statements above. This was all about the RESISTIVE FUEL SENSOR not the capacitive. I completely messed up the...

Diplexer, NOT a simple splitter.

Thank you GKC, This morning I'll check all the grounds again and install the latest software update with release: SkyView...

The Archer antenna is tuned for VOR/ Loc. it so happens that glideslope is a multiple of the LOC and the antenna receives it fine...

If you have power and ground to the units (both the remote transceiver and the control head, then you will get something on the radio...

I installed all three of these components, intercom, radio panel and transceiver, and attached to the skyview network using the SV...