Latest activity

I think this is a great idea!

My original question was in search of the Dynon ‘document’ that spells out the ‘process’. I appreciate the responses that basically...

I've never seen it either. But I think he's referring to the physical install for displays in general. It's all network connections...

Perhaps it’s been added to the current install guide, but ‘third display’ details were not in the install guide a couple years ago when...

I don’t know that there is a “process”. It’s all in the install guide. As to there not being many 12v network switches, that’s not...

Still available

Dynon has not responded and I have not yet added the third display. I’m rather torn between keeping my ipad mini in that spot with...

@PYoder I'm about to add a 3rd skyview classic myself and came across this thread when searching for the same answers you requested...

There are several levels at play here. Alert audio from the displays is normally tied together physically, and yours should be...

In that case, I would start with the SV and make sure it is configured to for audio out and turn up the volume all the way. (You can...

No AP74, using an SV-AP-Panel/H. No HS34 either. Perhaps I've got an audio wiring issue from the Dynon system when it's operating as...

Thanks for the replies. If I remember correctly, I tied both audio outputs together. They are fed into the ADF port on a Garmin 340...

Do you have an AP74 or HS34 installed? Alert and EMS audio normally take different paths, but an AP74 or HS34 will take over at least...

Two requests: 1: Allow me to press the CHT/EGT display and toggle the LoP feature. 2: On the glideslope portion of the georeferenced...

One other thing, when you slow down to land, without carb heat, the carb temperature will increase. At least it does in my RV-9 with the...