Latest activity

If I recall correctly, that setting does not select the visibility (distance) at which it shows obstacles, but rather the scale map at...

Dear swatson999, thank you for replying. I operate in the uk. We have to use one of a couple of licenced suppliers. My contract is...

Thank you very much for your reply. If I look in map Layers there is no option for obstacles being turned on or off. The pilot’s guide...

Yes.

Yes.

Hi, I have a Skyview touch installed in my airplane with Dynon autopilot and the five Port hub is already full. I need another Port. Is...

Is it selected as a MAP LAYER in MAP CONTROLS? If it is, I'd try downloading and installing the database again. That sometimes fixes...

Yep, Vic should know. It should be pretty easy to narrow it down before checking actual wires, if you have access to the ACM. If the...

Guess I'll dig in the wire mess starting at the ACM. I've only got two fuses in the panel: Aux ALT and IGN. I would have preferred...

I have recently noticed that my HDX setup is not showing obstacle information in wither PFD or moving map. I have the visibility set to...

Selling the following Dynon panels, all vertical orientation, all in perfect condition cosmetically and I guarantee they fully function...

It should be between the ACM and the SL40. But I've seen some really weird installs, so there's no guarantee of anything. And this also...

Disregard. He figured it out. My pinouts were correct. All that was left was pin 9 that needed to go to the TMA45 common ground

Hey all, I'm working on the pinouts for the SV-COM-T8 to the TMA45 and my A&P and I are at a bit of a stalemate. We're using the T8 as...

My SL40 won't power up. I pulled it and confirmed it powers up with external 12 volt battery and confirmed that #1 pin in the tray isn't...