Latest activity

Thank you all. Moved my Stratux external antenna 2 feet and solved issue.

Success! Once I was able to get back in the air, I re-did the AOA calibration and the constant beeping has gone away. I did test to make...

Personally, if it’s a nylon fitting like you are using, I would not use anything as the soft nylon should fill the gaps and provide a...

I assume Marc Zietlin was suggesting the use of sealant between ADAHRS and the metal end of the gizmo to which the tubes are attached...

Loctite 565 should not be used on nylon fittings. I suspect their advice was assumin metal fittings.

I did hold the plunder on the syringe to avoid "creep" and the altimeter very quickly went back to field elevation. I'm going to check...

Need a horizontal mount AP74 if someone has one they aren't using.

GPS175 sends the GPS position, waypoint coordinates/flightplan, and lateral and vertical guidance to the HDX. All that will still show...

Without a sensor, the display will be nonsense. Why not just use the totalizer function to keep track of the total fuel on board and...

Could be that. Let us know how it goes with more separation of the antennas, it may help others.

All separate. Separate systems between Dynon and IFLY. I am beginning to think the Stratux external GPS antenna is to close to the...

From my own experience, I had a problem with airspeed indication, the pitot hoses in my wings, long time 10 years standing and then wing...

Two possibilities - first, the tubing is not tight in the nylon fittings - you can easily check to see if the nuts are tight and that...

I pulled the plunger out slowly to get it up to 2000' (or so) and stopped -- did not remove the syringe from the static port -- and the...

Sounds like it failed the case leak test. That's the only thing that mentions 100 feet. It's 100 feet in total leakage in one minute...