Latest activity

Yes. It has happened numerous times in the past. But usually drives that work don't suddenly stop working. It happens, but not often...

Both sets were formatted FAT32. One set is Verbatim and the other set is SanDisk. Both sets have worked previously so it seems that...

aah yes... should have though of that. as you see... electrically disabled :) Got my panel all wired up and I'm happy I came this far...

Having to swap flash drives isn't anything new. You should try reformatting them if they've worked previously. You should also use a...

I've switched from Airmate to Seattle Avionics as the database supplier because I had problems where the neither HDX would not recognize...

You could check continuity with a multimeter. One wire on the shield, the other on the plug/sensor. Happy to help!

We have always returned the TT21 and TT22 to Trig for updating. I am not sure there is a means of updating it yourself.

From my perspective, explaining this without a schematic, is impossible. I would need to understand how your system is measuring those...

Thanks for the feedback @benapilot. That clarifies things. I'll use the power wire directly from vpx and pin 32 for the signal. I had...

I have just replaced a faulty Dynon EGT probe ( (515 hours since new) on cylinder #1 . I had removed the Earthx ETX 680 battery , as...

We have always returned the TT21 and TT22 to Trig for updating. I am not sure there is a means of updating it yourself.

I believe 12.25vdc is about 60% state of charge for that battery. That's probably the minimum voltage that the Skyview would allow you...

Not to my knowledge, no.

Not to my knowledge, no.

I used a slightly different UMA sender, the T1A3 (installs where the RPM cable was) so I'm not confident the wiring will be the same...