Latest activity

Sorry , I have been absent from here. I am not technically savvy. I have a shunt on my Alternator Reg output to measure current to...

The data is kind of scattered between the certified and “general” installation and user’s guides. Unfortunately you need to reference...

At the core is the question of "What data is in this World-wide terrain database. "? To display what it does, it needs to have MSL...

Ah...got it. Was researching the statement in the Setup in the Installation Manual....should have realized it might have been in the...

The skyview cannot display DME. The distance is a GPS based figure based on the decoded NAV identification (to determine the DME station...

I would experiment with non-Apple devices just to narrow things down. I've seen Apple devices cause problems like this before.

I also experienced wifi drops when more than 1 device is connected via wifi. If you fly with your cell phone make sure you disable...

Sorry was off-line for awhile. I'm keeping a KX-165 nav/com which was connected to a KN64. I'm also connecting the SL30 (thru a DB30)...

Was only installed for a couple months before upgrading. $200 takes it

Thanks for posting the solution. I had probably accidentally used the number label rather then L and R. In reading the Installation...

Have installed the Aithre and it works perfectly.

Thanks for posting the solution. I had probably accidentally used the number label rather then L and R. In reading the Installation...

UPDATE: I spoke with Dynon Tech Support today. Simple solution: In the Sensor Mapping Screen, I needed to use "CHT 1" and "CHT 2". I...

My experience with Dynon Wifi was mysterious and aggravating enough that I finally just gave up and do without.

Have installed the Aithre and it works perfectly.