Latest activity

I completed my 2nd test flight today after the install of my new panel Dynon HDX 1100, ACM and EMS. Unfortunately as I entered the...

Thank you, the #10 wires are for the bus manager per the EFII set-up.

#10 wire is a little light for potentially 105A of current. I'd use a 100A shunt. Should be #4 into and out of the shunt on it's way to...

Thank you, that’s exactly what I needed. I’m happily transitioning from Garmin and needed a little assurance with the new combo.

Would this set-up work? I want to be able to measure the amps on both alternators through the Dynon System. I should note I also have...

Yep! I know all that, but will it result in the PARTIAL ADS-B status on screen? Would love to know what other Aussies are getting.

Thank you, that’s exactly what I needed. I’m happily transitioning from Garmin and needed a little assurance with the new combo.

Hi Larry, I fly with a 550/440 combo and Dynon and have installed a dozen or more. Here is what I recommend: Dynon - subcribe to...

I have an Avidyne 540 and a subscription to Jepp charts that is about to expire. I have recently completed installing a Skyview HDX and...

Are there any plans or proposals to ever implement those services in Australia? I know you guys get 1090ES from aircraft to aircraft...

I have a similar issue with my Skyview HDX and the latest software update of 17.4.0.2367. I didn't have this error initially after the...

We down here in the land down under don't get TIS or FIS

Just disassemble the battery and you’ll have every detail you need. your 82 year old eyes might not clearly see the p/n numbers. If you...

Here is the latest update… oh boy am I happy The LCD/touch driver was failed, so some bad hardware unfortunately. They replaced the LCD...

So I cleaned up the USB drives and reloaded them from PocketFMS, problem fixed.