Recent content by Hbadawi

I updated today to the latest software release 17.x. My screens for some reason got switched, my primary became secondary and vice versa. What is the setting to make a screen primary and the other secondary? Can’t find it in the pilot user’s guide. Thx

Thanks for the reply. So I get how you have to manually switch between the 175 and the sl30. But what do you mean you have to manually set the CDI inbound course? I just put in the ILS frequency in the sl30 and the green arrow should show up correctly on the HDX?

So yes I am realizing that the auto switch can not happen as the connections to the hdx do not happen via Arinc. So I can just manually switch the nav source as I get to the faf. What do you mean by setting the localizer course manually? By the way the antennas are at the bottom of the...

My 175 is connected directly to my ARINC while the SL30 is connected via a serial port to the HDX. The SL30 does drive the CDI when tracking the VOR.

Hi There: Here is my setup: 2 HDX 10”, Garmin GPS 175 and a Garmin SL30. Arinc 429. I have been trying to get the Dynon Autopilot to fly via a GPS set course on the 175 until the final approach course (say via vectors), then have the HDX auto switch to the nav 2 signal, which in this case...

Both have been sold for asking price. Thank you.

Just sold one for asking price. So asking price seems fair.

Hey There: Hardware: 2 10” HDX, Garmin GPS 175, Garmin SL30, 2 axis Dynon Autopilot Is there a way to get the 175 to send to the Dynon Autopilot the DO NOT GO BELOW altitude of the next waypoint when on an IFR approach? I can enter the altitudes manually and tell the autopilot the altitude I...

I recently upgraded to the 10” HDX and have my 2 Skyview Touch’s for sale. They have less than 200 hours of flying time on them and are part of a 2018 build. Pics attached. They each come with the cable harness. Asking $2700 each obo. Contact me at hbadawi71@yahoo.com. Located in Austin, TX.