kurtfly's latest activity

Yes- Dynon has been notified. It appears to be a problem when using an external navigator (ARINC 429). You should notify Dynon so...

I wish I could. One day maybe. This technology is rapidly improving. If my girlfriend would only be as enthusiastic about jewelry...

No problem. Here is some #6 nutplate shims set at the panel / screw angle. I counter bored the hole sou you can mount the nutplate on...

That will not work, I am in Texas. Here is the .STL and .F3D file zipped. You can find someone to print it for you or use a service...

I printed out a sample in PLA. It looks pretty good, but I don't have a spare HDX-1100 to check for fit. Birddog, where are you...

Thats is a good question. i thought of couple options. thru screws that go thru the panel but the screws will be angled, requiring an...

Something like this? This is for the HDX -1100, will tilt the display 1 inch.

I assume you are looking for something like this panel. The Glasairs have been using these for 25+ Years. They are sold as the vision...

I confirmed yesterday that if i enter a flight plan into skyview and change the HSI source to Skyview the next waypoint identifier is...

Check your side tone setting. turn it up higher and see if that improves

The EarthX battery BMS already monitors the temperature and will provide a light output that can be connected to your Skyview display...

Dynon is aware of the bug. I did get a response back from Don at Dynon. i suspect the holidays have delayed any real responses or work...

Yes it should be showing the name of the waypoint. I sent an email to Dynon on this as it appears to be a bug in the latest version. kurt

I see same issue when updated to 17.4. If you have “NEXT WPT” in a datablock it will be blank. I think it is a bug. Kurt

I noticed today that my “Next Wpt” data block is always showing ————-. This used to work. What am i missing? Is this a new feature of...