ADAHRS Fail

[SkippyDiesel]

I keep telling you, I am very new to this technology, having just graduated from steam gauges. This coupled with not being in the first flush of youth and the need to partially dismantle my panel, to gain access to the back of the Dynon Skyview, all combines to being a very slow learner/reluctant to go somewhere that Dynon hasn't asked for.

I hope you can be patent.

I guarantee the next time it fails, I will endeavour to do the down load before the data disappears.

 

[airguy]

When something goes wrong with Skyview your FIRST reaction, always, in all cases, should be to download the diagnostic file. It takes about 5 minutes and costs you nothing but the time to do so. 9 times out of 10, sending that file to Dynon will get you an explanation of exactly what failed and how to fix it, even if that does require digging into the hardware. This is covered in the user manual.

 

[swatson999]

When something goes wrong with Skyview your FIRST reaction, always, in all cases, should be to download the diagnostic file. It takes about 5 minutes and costs you nothing but the time to do so. 9 times out of 10, sending that file to Dynon will get you an explanation of exactly what failed and how to fix it, even if that does require digging into the hardware. This is covered in the user manual.

User manual? USER MANUAL? Now you're expecting him to read the manuals? /s

 

[SkippyDiesel]

Update;

Tried every suggestion, so far no cause, no remedy.
Sent Diagnostic File to Dynon, three weeks ago - no response. So much for that!
To end on a good note - so far the ADAHRS problem has not recurred.

 

[SkippyDiesel]

Saga continues.

AHAHRS continues to fail, always on ground, at first pre start activity of the day. About 3- 6Hrs (Hobs) between failures.

I now do a "Forced Load", followed by shutting the whole system down for a few minutes. When I turn back on, ADAHRS comes back and functions as normal.

A second diagnostic file, to Dynon, USA, has revealed any anomalies.

Latest strategy: Dynon is sending a Loaner SE SV/D600, in an attempt to isolate the problem.

Living in hope