Search results

So I have dual SV-700s, an IFD 440 and I use foreflight. Currently, to load data I have two wifi networks, one skyview, and one on the IFD. To load a flight plan I have to connect wifi to the IFD to load the flight plan, but then I usually change the connection to skyview to get the traffic...

2- 7” Dynon Classic, one ADAHRS, GPS 2020, EMS220, 3 Axis Autopilot, SV-XPNDR-261, SV-ADSB-472, SkyView VHF COM, SVARINC-429, Avidyne IFD-440 Something strange is happening within my System. For some reason the VSR box on the map no longer populates, additionally, today the COM radio has now...

For some reason the sectional layer of my map display has very little contrast.  If I zoom in fairly close it is better but zoomed out it becomes very low contrast and due to the low contrast difficult to read.  I have been thinking it was some other overlaying terrain, WX, causing it but...

When doing a second, third, etc calibration of the AOA using the inflight/onscreen stall series, does each subsequent calibration overwright the previous calibration? Or does the new data "Add to" any previous calibrations?

My AOA is set up and calibrated. During calibration I can clearly hear the beeping, but once out of the setup/calibration menu the AOA does not transmit a tone when stalling the aircraft. The visual indicator on the display seems to behave properly and represent the approach to stall. Again...

Loud aircraft, all menu settings maxed out and volume knob on SV-Com is turned all the way up. Volume is almost adequate but sure would be nice to be able to get a bit more out of it. 2 SV-700 displays with audio outputs tied together as per the installation manual, all sounds work and...

I would appreciate the groups wisdom on the puzzle because I would like to get it right the first time.  I am sure someone here has connected the Dynon Com to a PS engineering audio panel... I am connecting Dynons Com radio to a PS engineering PMA5000EX, and I am not really understanding pin 2...

We are in the initial phases of test flying a PA-18 Replica kit. I am having strange readings on the fuel computer and timers. Specifically, the Gallons remaining is way off even though the Gallons used seems to be in the ballpark. Also the air trip is higher than it should be, although run...

I am assembling an aircraft with a dual 7" Dynon system installed. When I boot the system up, neither screen has the PFD page on it, and there is no button on the screen menu to add it. The wings are currently separate from the fuselage, and the ADAHRS is in one of the wings, however, I SWEAR...

I used the following L-Com product to extend the USB port on the back of the Dynon display to the panel, in hopes on making it more convenient to do updates, etc. However, to my disappointment it does not seem to work, could someone please explain (to a non-techie) why this does not communicate...

I am installing a Dynon system on a Supercub Kit. There is a thread out on the SC forum where as someone has shortened the Non-heated straight Dynon AOA pitot tube. For this particular installation being able to shorten this thing would be helpful. I Was wondering what Dynons or the forums...