Search results

  1. E

    Zero RPM reading on R mag

    I am seeing correct RPM readings when both mags are on and when only the left mag is on, but zero RPM when only the right mag is on. I disconnected the 37-pin connector from the EMS-220 and leads 32 (left RPM) and 33 (right RPM) from the ignition switches and verified that I see 30k-Ohm between...
  2. E

    COM-425 location

    I could use some direction in determining the best place to mount the COM-425 in my RV-6A. I will mount the antenna under the left seat (I've already drilled for that), and mounting the COM-425 behind the instrument panel looks like a good place, with convenient wiring to everything--except the...
  3. E

    Pitch servo interference, RV-6A

    I have installed the pitch servo as described in the instructions and am concerned that the bolt head on the servo arm passes the vertical structure supporting the bellcrank with virtually no clearance.  I can replace the standard washers with thin washers, buying me perhaps 1/16 or 1/8, but...
  4. E

    EMS wiring cross-talk

    What concerns are there about cross-talk between wires that would lead me to separate them from one another? Is it safe to bundle, for example, a thermocouple lead and a magneto P-lead? Two or more serial lines? I assume that other than power connections, pretty much any wire in a SkyView...
Top