Search results

funny! I get noise when the displays boot up, than the noise goes away once the screen is booted. Sounds like a short to me.

It has to do with winds. The seconds drive me crazy! it means the calculation is adjusted due to change in GS along flight. Can we "filter" by removing the seconds option?

Here is the link to user guide http://content.savvyanalysis.com/static/pdf/SavvyAnalysisUserGuide.pdf

One thing mmarien isn't is snarky. He is an expert and handled your questions very nicely. He was simply stating that Dynon offers a great setup as is, he spent numerous hours fine tuning, as have I and others. This forum is for guidance not how to design a new EMS. There certainly are snarky...

Has anyone installed a Surefly EI in their aircraft? There appears to be a RPM issue with other EMS systems , I am attempting to determine if there is any issues with using the standard wire currently used for the Magneto with the resistor attached, before i start taking things apart to find out...

I prefer if they just release 15.2 and documentation at same time ;)

Please consider an ECHO option versus the requirement to invest in a $1800 mode S transponder in order to get ADS-B IN. I would gladly continue purchasing future Dynon hardware if it was reasonable and affordable. I do not want to pull out a perfectly working transponder (which is currently...

Support; is the data compatibility a limitation of Uavionix or Dynon? I know it can be done because Dynon uses a version from them already for the in house ADS-B, which I would purchase if I could do everything the Echo does, specifically keep my transponder (that works fine). I can certainly...

Interesting Since uavionix website states they do: traffic and UAT FIS-B (Weather) services o iOS/Android (GDL90 Compliant) o EFIS (Dynon, MGL, GRT)

I had the exact same issue. never saw it happen before. I actually did a settings and test in the air and the buttons on the flightstick all worked, actually everything worked fine. I rebooted the SV-1000 and everything has been working since. I'll report if it does it again. For sure there is...

Support; Using 15.1 the vertical speed required guidance is only overlaid on the VSI when HSI source is set to SkyView. But can it be overlaid on the HSI instead of the VSI? Im learning to look at the VSI, but I sure would prefer to have a horizontal line reflecting the vertical speed required...

With Savvy analysis you not only see all the engine information but on the bottom there is two options. 1- show flight maps 2- KML file KML file can be opened in Google Earth and allows better viewing with satellite and other layers, flight maps is a simple map layer and no other option.

I tend to disagree here. It was mentioned before that we have tools at our disposal and that is right on. I flew into the foothills of the Sierra Nevada mountains one dark night, it was pitch black and 7 clicks didn't show the runway, yes, I was flying referencing my skyview and I used the...

Steve; I agree but every version v14 and below works fine for me in Acrobat pro, and reader, including ibooks on IOS. But not with v15, in all cases its a bigger box. I did however remove Adobe Reader DC and used a very old version of Acrobat and that does allow me to copy and read correctly. So...

Did something change in the PDF format on v15 manuals? I used to be able to search a word and it highlighted just that word- I could save it (aka setup steps) and it would take, now I get square windows and no ability to copy. If I reference the online version with CTRL-F it works correctly but...

I did this a few years back except all the colors I chose match the sectional colors Blue for B, magenta for C blue for D, Than I made colors that would stand out for the rest RED for Prohibited Orange for Restricted, purple for MOA. I might suggest, if you're going to take the time to change...

I have always had this issue, I havent flown enough with v15 to see if that was resolved. I ended up making a user point right on the runway threshold (I literally got on the threshold and used the LAT/LONG on that spot to create the user point. Has lined me up everytime since, if I fly the D->...

I hand fly most of the time including the landing- I too had the same issue, except the magenta line worked great for me until 1NM and 400 than just dropped. I spoke with Dynon about this and was told to change the runway setting to 0NM (threshold) and 50- same as you have and that would...

my guess [ch8203] VNAV- MAP->MAP MENU->VS REQ’D OPTIONS where one can program a specific glide slope and target altitude above the runway altitude. example I need 3.2 degrees to get to my airport but normally its a 3.0 glide slope. Like the old blue arc, one sets the altitude above and distance...

I think you mean the description of HITS in the pilot manual, not how to setup and use the features. To be clear, I am asking for the Installation manual that actually explains the setup screens and how to set the various features, including how does HITS work, not that I can use it with or...