Search results

Hi, I just installed a Garmin G5 as a backup for my SkyView HDX ( installed with the Advanced Control Module so, no wire integration between them as there is no available serial port to that). However, I noticed that, to match my Skyview altimeter setting (30.17), I had to go to 30.11 in the G5...

I just tried the emergency glide feature today. There are my findings: - Glide ring stills a circular ring - not sure if it is considering weather/terrain in this case (the ring in FF and Garmin Pilot is not circular at all); - First try (no airports near by) only said "EMERGENCY GLIDE NO VALID...

How many devices can be connected to SkyView Wifi Adapter?

I have read the manual and looked for any other postings related here, without any lucky. I wish I could see the airport diagram while on the ground (minimally when landing at a new airport). I have the Airmate charts load in my USB and the stick is connect to my HDX. When landing, I push the...

First of all, sorry if this is posting is not in its proper forum. I have Garmin Lidar sensor in my airplane, connected to a ESP32 board that displays the height. It is not super fancy as the new GHA 15 height advisor from Garmin but it does the trick. I am considering (if possible) the idea...

Like many other owners, I only have one Dynon Skyview display and, after having my LCD display malfunctioned while flying (twice), I decided to install a backup attitude indicator but, what about the my engine data? Even with the LCD issue, the engine data is still there (in my cases, the WiFi...

Hi, I have a MGL N16 radio connected to my HDX11 via Advanced Control Module. However, never used it, nor paid attention till yesterday, when I was doing a transponder check and asked the technician to check the nav radio. Here what we found: - Antenna works fine, as well as the radio and the...

HI, I am trying to get familiar with my HDX and I noticed that after setting my altitude to 3200ft (see attached), the AP ALT kept showing 3100ft. Any ideas why?

I am considering to install fuel senders in my main tanks (builder decided not to do that). I was suggested to use capacitive senders but, unfortunately, I do not have any Enhanced General Purpose inputs available, which will force me to use resistive senders with General Purpose inputs. I have...

Hi, my airplane has 2 main tanks plus a sump one (3 thanks in total). The builder only configured a fuel level sender to the sump tank and connected it to pin 20 (General Purpose Input). Is it safe to assume I can move it to another General Purpose input if I decide to install fuel level senders...

Hi, the builder of my Velocity did not install fuel senders in the main tanks (he opted to install one in the 6gl sump tank only). I'm considering the idea of installing senders in the two main tanks but, not being a builder, I have not idea/knowledge of which senders to buy. Thoughts? Any...

I'm considering to install an ifr approved gps and the GPS 175 looks great (size and price wise). However, playing with the trainer app I noticed that the keyboard is awful (as you have to keep swiping to get access to the letter). Anyways, can I make inputs to the gps via HDX touchscreen...

Where can I find documentation of Skyview Wi-Fi API? As a mobile app designer, I would love to integrate Dynon's data in my aviation app.

Hi, my airplane (I am not the builder) has 2 wing tanks (20gl each), with no fuel sensor, plus a head tank (6gl) with a sensor installed. Yesterday I emptied everything for a new weight and balance and got the message (see attached) stating the in-tank sensors were measuring 1.6gl. Any ideas on...

I moved my adahs to a new tray, a few inches from the original position. I also moved the GPS two feet to the front of the aircraft (a few inches lower than before). I am trying to find any info on how to (if needed) to re-calibrate the two items. Thoughts?

I have the authorization to change my N number. I am using a full Dynon Skyview solution (GPS, transponder, radios, you name it). Any ideas on how to properly do the change or is it just as simple as changing the current number with the new one in the Aircraft settings?

I have the shunt connected to the EMS and configured (I assume properly) in the Skyview. However (I know this picture was taken on the ground but I have the same results while flying with the ALT on), I just get this "Crossed" widget nothing showing any info about the amps. Any ideas on how to...

I have installed a backup battery for my Skyview HDX display. However, because the battery is not fully charged, I keep receiving an alert/warning/message about the issue. My problem is, even reading the alert, I keep getting the audio message over and over. My workaround was to disable the...

Anyone who has experience with Avidyne IFD410? I am trying to decided which route to take (GPS175 or IFD410). Also, any ideas where I can find the IFD installation manual? Will I need a specific tray to install it? Thanks! Alex

Does anyone have an AV-Link installed with an AV-30E? I was wondering if it captures traffic from the ADSB-472 module.