Search results

I Thanks, that solved it. I have the AP button on my grip so it is real easy.

Something new I just found out is when I bank hard I get an audio alert “bank angle”. How do I get rid of that, I can’t find any reference to it in the menu?

I made a small course with left and right turns, the legs were 1-3 miles long. I flew the course with 16.0.1 then landed and upgraded to 16.3.2, and re-flew the same course. There was no difference in the way the plane navigated the course or the turns. I flew both at about 4400' and 100kts. The...

I finally got back to night flying and the brightness control, or lack of, is annoying. The local brightness sensor is reacting correctly and in the dark shows close to 0 but the screen is too dark to easily read. I have tried to adjust per the Dynon instructions. I would expect when I am in the...

What I needed help with was to modify the widgets beyond the available settings. What I did was change the widths of the bars, making the primary info ones wider than the others, also changed the display names so the single line was reading the proper name.

Well I played long enough to figure it out. Down load the user configuration file from the Dynon. It is named "xxxxxxxxx USER_CONFIG.dfg". Open it in notepad on your computer. Everything that sets up the display graphics in there. Edit it on the computer and give it a new name, just in case you...

Can someone tell me how to edit the widget name (label) that appears on the EMS screen? I want to reduce the clutter on my 20% screen and would like to reduce several names like "BATT VOLTS" to "VOLTS". If I toggle it in the on screen it removes the wrong label. For instance "BATT VOLTS"...

OK, got it. I will follow this guide and report back.

andresmith76, Thank you for the guidance. The manual I found; https://dynonavionics.com/public_html/yabbfiles/Attachments/SkyView_System_Installation_Guide-Rev_W_v14_0.pdf section 4 only goes to 4-32, do you have a different manual?

Yes, I have played with minimum brightness. It seems to affect the transition point (local brightness sensor) that the display starts to brighten. It does not control the minimum brightness. Is there a setup manual for this part of the Dynon?

That is what I am doing but changing those numbers does not affect the minimum brightness as I would expect. I have the same % values you show (default). The brightness is great during daytime but at night is is too dark.

Can someone tell me how to setup the display to control the level of auto dim. My problem is when it is dark out the screen it to dim to see. I have to use the menu to increase the brightness. The sensor shows that is is sensing from 0 - 100% based on the light level hitting it. I can't make...

It is not a filtering issue since the IPad has shown me traffic at my altitude 2 miles out and the Skyview showed nothing. I would have thought that if the traffic was being picked up by the 472 and sent to the IPad then the Skyview would also receive it.

I have a Skyview Touch with a 472 ABS-B receiver. I fly with an Ipad connected to the Dynon WiFi. I use IFlyGPS app on the Ipad and it always shows traffic but sometimes the Skyview does not show any of the traffic that is showing on the IPad, even real close traffic. This "lack of traffic"...

Yes there is a horizontal band in the digitizer that is not sensing properly. I contacted Dynon and was told it would cost $450 and I would be grounded for approximately 3 weeks. There is nothing else failing on the system, everything else works just this one line on the screen is an area I...

When I touch the touch screen it sometimes locks up, (it does not accept any touch commands), until I reboot. If I turn on the touch tracker I can see the touch dot stays on the screen after my finger is lifted. If I retouch the dot and move it it then lift my finger it disappears and the touch...