Search results

Hi, we ar quiet new to the sysetem and i have watched a lot AP videos from Dynon. When using the AP it is easy for me to select Heading or altitude and it works fine. What I Do not manage to get working is using the flight plan and then activate track function. So the airplan flies to the...

Hi, we have to identical HDX isntalled. Having made our first flights some questions are actual. Bug Knob: Setting the Heading Bug from Pilot HDX works fine using the left knob selecting Heading and tunr the knob. When i try this from the Co Pilot HDX, i only can select Altiude,Baro and some...

Hi everybody, is it possible In The sky view hdx system to create a Flash light poppig up in the Display if the alternator fault Signal is getting active. Or is it even possible to create a warning messages if this fault is getting active? I am not sure using an external warning lamp or the...

Hi, Trying to connect the air traffic from air avionics I wonder which seriell Format the hdx expects. I have tried a lot of different configurations Baudrate is always on both parts the same. Tried from 4800 to 19200. Rx From air avionics to tx hdx, Tx from air avionics to Rx hdx double...

Trying to connect an air traffic System to the sky view hdx i wonder how to connect the Audio Signal correct. The air traffic System Has a Audio out Signal. Do I have to connect IT with the high or Low input of the non muting in of the hdx intercom? Or Do I have to installthe the the low signal...

Hello doing the installation I wonder if there exists a housing for the shunt. I Do not want to leave the Power lines open anywhere before the firewall. I made this as a first attempt

Hello, i´m not pretty sure if it is posible to use the above pin for a flap position sensor (variable resistor) without an additoinal 12 V sensor supply. Is ist possible to use that Pin with an programmed pull up resistor to 12 V, and meassure the Voltage as a Flap Position Signal ? I made a...

Hi everybody, planning the installation of our Dynon System I wonder if it makes sense spending 3 circuit breakers (5A) for the communication system, or one would be enough. In my Opinion, if the SV Com is out of order , the Com Panel and Interocm is useless anyway ? What do You think about...