Search results

I only get "Check Canopy Latch" warning if the engine RPM (Rotax) is above 3700 and canopy is unlocked. No other time. Is there a way to just have it say something more appropriate like "Caution".

Is there a list of the custom audio files? The Skyview in my RV-12 has a warning: "Check canopy latch" which was added after the plane was built. Did this originate from the Vans setup files?

I get the aural warning "Engine Monitor" in my RV-12 when the stall warning sounds and also when I unlock the canopy.  Is there some way to disable this?  All other warnings and functions seem normal.

I have Skyview V12 and can't get the Vertical Speed bug to go out of view even though it is selected off. Additionally, occasionally on powerup, all the bugs are selected off except "BARO".

Ditto to that. It would be a useful addition, especially with a customizable marker about 3 miles out.

After adding a second screen to a Vans RV12 SLSA, I get "caution" warnings in the headsets repeatedly during flight with nothing annunciated. I suspect it is alerting as my speed enters the yellow band although it did not do this with the single Skyview. I would like to choose just what is...

While updating the flight planning software, I would suggest also allowing for a multi-route flight plan for those that make multiple fuel stops while enroute to a more distant destination. Mitch757 RV12...getting close

If I install a Skyview system, will it control/operate my existing Trutrak servos, or do I need to change them?

Does the female DB9 connector to the ADAHARS unit need to be of special non-ferrous construction? Or will a standard Dsub work using a plastic backshell?

I would like to suggest adding the FAA center frequencies to "NEAREST" selection. My old Bendix/King KLX135A had this very useful feature.

This is my first time using the Skyview and can't find a way to remove useless(to me) symbols like intersections and adfs. Way too much on the screen. Can it be done?

I'm an early purchaser of the EFIS D-10.  It isn't clear exactly what upgrades (HSI?) are available for this unit.  Could you elaborate?  Thanks! Mitch Garner RV-4

I've finally gotten around to installing my D10 and have some questions: 1. What is the use of the second "master power" connection at pin 14. Does it need to be connected to the same fused power as Pin 1? It seems to work without it being hooked up. 2. The hood of the D25 connector will...