Search results

  1. C

    Audible Check Gear Alert

    Equipment: HDX with SV-EMS - I've got microswitch on Gear that signals when gear is all the way down. It's wired through SV-EMS as a Contact named GEAR - I've put the "red/green light" widget in my engine display and it responds appropriately turning green when the gear is all the way down...
  2. C

    Alternator Fault Indication when Primary Alternator Disabled in VP-X

    Installed: Skyview HDX and VP-X with Primary Alternator monitoring disabled because I have a permanent magnet Alternator In VP-X Configuration, I've disabled the Primary Alternator circuit (actually cycled it from enabled to disabled as recommended for Rotax applications) but still getting a...
  3. C

    Reading Serial Port to get AGL data

    I'm installing an HDX1100 and would like to get it's computation of AGL as part of an external logic to warn me when gear should be extended (ie when AGL is less than 1000 ft, for instance).  I know I can probably program an alert IN the HDX, but I'd like to power a separate warning light, and...
  4. C

    two red wires on D37 Harness for EMS

    I'm wiring an EMS D37F harness and notice that there are 2 red wires in the harness bundle.  Because the harness is pre-wired to the D37 connector and closed up, I can't tell which of these red wires goes to pin 1 (Battery Voltage input) and which one goes to pin 15 (fuel flow power).  One of...
Top