Search results

In one of the two USB ports on the back of each display.

I have a new HDX System just upgraded to the new version 17 software. I have only had the system powered up for a few days. I wanted to setup the wi-fi feature, but the displays are not recognizing the Dynon wi-fi adapters plugged into a USB jack on each display (2 adapters, one plugged in to...

Thanks Jake.

I may have made a bad decision to have both HDX displays on the avionics bus (downstream from the avionics master). I know that Dynon says it is OK to start the engine with all systems powered, but I was used to (in the old days!) starting the engine, looking at my analog oil pressure gauge...

Hi Rhino...I want to have the engine data visible so I can (primarily) verify that I have oil pressure right after starting (don't want to wait for system to boot).

One of my fellow builders told me that the Skyview system with a backup battery can be powered up without turning on the avionics master switch. This would be done to observe engine data (e.g. oil pressure) at startup before turning on the avionics master. I think he said that you can...

Very nice!

It's a pretty neat board--well thought out. Similar to the intent of the Advanced Flight Systems' "Advanced Control Module" (make installation as plug-and-play as possible). See attached.

I am in the process of designing the wiring on a dual-display HDX system. This Skyview Interconnect Board (see attached) has been a lifesaver! Brian Adams <hr2plt@yahoo.com> designed it and sells it. It takes care of the many, many splices that would otherwise be required. This is about as...

I agree with you on this. Thanks.

I spoke with Dynon tech support this afternoon and learned some good things... 1. The SV-INTERCOM-2S does not have a backlight--only the POWER/TX LED dims. 2. The Dynon Network transmits brightness settings to all network devices. Those that have backlighting will be dimmed. 3. You can...

I have read on forums that the only thing that dims is the POWER/TX LED. Since I have not yet powered up my system, I am not sure if there is a backlight for the legends on the SV-INTERCOM-2S.

Thanks tniel7331. I found out today from Dynon that the Skyview Network controls dimming across (all?) the Dynon devices that connect to the network. I couldn't find that anywhere in the documentation (I have missed a good bit, though because of the amount of info in those documents!) That...

I have been researching the dimming operation of the Skyview HDX system and I keep finding differing opinions on how it works. Dynon has told me different things... Does anybody really know how the dimming circuits work? For example, I have a two-display system. Is it possible (without using...

OK. Thank you.

I bought and installed a remote magnetomer in my wing but I am probably 2 years away from buying the rest of the avionics. I wondered if it would be possible to connect power to the magnetomer and look at the RS-232 communications over the network cable? Does Dynon publish details on how...

Thanks David, Mike

I am planning to buy the unheated AOA/Pitot Probe (#100141-000 ). It requires a mounting bracket. I noticed on the Dynon website that they offer Builder Support Products. There is a Pitot Mount Bracket for the VANS aircraft. Would this bracket work for the RANS S-19 Venterra? Is the...