I am using an ACK technologies 406 elt unit I need to hook up a gps position data source from Skyview, I am using the GPS 250 receiver, I am not the best techno person, please advise which wire to hook up.
thanks
Gregory
I acquired a length of RG142 MIL-C-17 wire, looking up the specs it seems that it would work for my SV261 xpnder installation. The wire was free and would like to use it. Total lenght would be approx 9 ft. I would appreciate your response.
Gregory Targonski
Reposted from EMS settings forum topic.
I would like to have flap position displayed on my skyview. The instructions call for power to the sensor come from the 5 Volt auxiliary pin #18. At this time I already used that pin for power to the manifold pressure sensor per instructions. Can I...
I would like to have flap position displayed on my skyview. The instructions call for power to the sensor come from the 5 Volt auxiliary pin #18. At this time I already used that pin for power to the manifold pressure sensor per instructions. Can I slice in the wire for the flap position...
I have a Garmin GMA 240 audio panel, which audio input should the Skyview audio source be connected to? Alert Audio or Aux Audio?
Thanks
Gregory Targonski
Thanks for the dimensions, but what I really need is the attachment hole spacing on the mounting tray so I can install the attaching nutplates at this time, while access is easy to my planned install location
Thanks.
Greg.
When will the installation diagram be available? I am working on my panel and would like to have the dimensions for the attachment locations.
thanks
Gregory Targonski