Search results

Does anyone have pictures to share on the mounting of pitch servo? I struggle to find a location that allows easy removal of the canard. Currently I'm thinking of attaching directly the servo on the canard, so it will come with when I remove the canard ... :-/

I thought GPSMAP 196 was enough popular to have a direct setup in SV, unfortunatly not. :( I tried to configure using x96 config, but i could not make it work. :P I finished using NMEA with 4800 bauds rate on both SV and Garmin. It seems to work fine. 1) Is my configuration optimal to use full...

So if i understand well : - I can power up the servo at start-up as they draw negligible current when they are is std-by - adjusting the torque ratio to 30% reduce the servo current consumption at roughly 30% of the doc values - it is worth installing a SV-BAT to my system as it will support my...

Thanks for the answer, than i have another question : what happens with my system if i had a battery SV-BAT-320 when i taxi at idle, and the alternator is producing less than what total avionic is sucking. Doc says "An SV[ch8208]BAT[ch8208]320 is fully charged when it reaches 12.25 volts ...

I have a LongEz with skyview D700 system with a roll servo. My long just have a small B&C alternator (actually more a dynamo) which output is limited to 15Amps at cruise, but very limited at low RPM between 1.5 - 4 Amps during taxi. 1) My plan is to power the servo only inflight to avoid to high...